Call 08048006353 19% Response Rate

Send Email

Ball Bearing

We are a leading Wholesale Trader of fag deep groove ball bearing, nsk angular contact ball bearing, ceramic ball bearing, koyo angular contact ball bearing, kg ball bearing and nbc tapered roller bearings from Mumbai, India.
FAG Deep Groove Ball Bearing
  • FAG Deep Groove Ball Bearing
  • FAG Deep Groove Ball Bearing

FAG Deep Groove Ball Bearing

Product Price: Rs 100 / PieceGet Best Price

Product Details:
MaterialSteel
BrandFAG
Bore Size20 mm
Packaging TypeBox
Outside Diameter100 mm
Surface FinishPolished
Thickness40 mm

FAG Deep Groove Ball Bearing are available in radial and axial designs for many different variants.

Single-row deep groove ball bearings are available in open and sealed designs. They are designed for high to very high speeds and can accommodate radial as well as axial forces.

Double-row deep groove ball bearings correspond with single-row deep groove ball bearings in design and are used when the radial load capacity of single-row deep groove ball bearings is insufficient.

FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads.

Specifications:

  • Bore Size: 10-240 mm
  • Outside Diameter: 19-1000 mm
  • Thickness: 5-115 mm
Get Best QuoteRequest Callback
NSK Angular Contact Ball Bearing
  • NSK Angular Contact Ball Bearing
  • NSK Angular Contact Ball Bearing
  • NSK Angular Contact Ball Bearing

NSK Angular Contact Ball Bearing

Product Price: Rs 300 / PieceGet Best Price

Product Details:
MaterialSteel
BrandNSK
Thickness30 mm
Bore Size20 mm
Contact Angle15 degree
Outside Diameter100 mm
Packaging TypeBox

The NSK range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers. These bearings have a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Furthermore, since an axial component is generated when a radial load is applied, these bearings are generally used in pairs, triplex sets, quadruplex sets, or multiplex sets. NSK offers one of the most comprehensive ranges of angular contact ball bearings available.

Features:

  • High Quality Steel: Ultra clean steel to extend bearing life by up to 80%.
  • Advanced Grease Technology: NSK lubricants that can extend grease life and performance.
  • High Grade Balls: Quiet and smooth operation even at high speed.
  • Super Finished Raceways: Specially honed to minimise noise and improve lubricant distribution and life.
  • Cages: Available in a range of polyamide, steel and brass cage assemblies.

Specifications:
  • Bore Size: 10-240 mm
  • Outside Diameter: 19-1000 mm
  • Thickness: 5-115 mm
  • Contact Angle: 15, 25, 30 and 40 degree
Get Best QuoteRequest Callback
Ceramic Ball Bearing
  • Ceramic Ball Bearing
  • Ceramic Ball Bearing

Ceramic Ball Bearing

Product Price: Rs 3,000 / PieceGet Best Price

Product Details:
MaterialSteel
Usage/ApplicationMachinery
Bore Size25 mm
ShapeRound
Packaging TypeBox
Finishing TypePolished
Thickness40 mm
Outside Diameter120 mm

Specifications:

  • Bore Size: 10-240 mm
  • Outside Diameter: 19-1000 mm
  • Thickness: 5-115 mm
Get Best QuoteRequest Callback
Koyo Angular Contact Ball Bearing
  • Koyo Angular Contact Ball Bearing
  • Koyo Angular Contact Ball Bearing

Koyo Angular Contact Ball Bearing

Product Price: Rs 15,000 / PieceGet Best Price

Product Details:
MaterialSteel
BrandKoyo
ShapeRound
Surface FinishingPolished
Bore Size30 mm
Contact Angle30 degree
Outside Diameter120 mm
Packaging TypeBox

Designed for high accuracy and excellent high-speed performance. Angular contact ball bearings are designed to carry combined loads: both axial and radial. Angular contact bearings are designed such that a contact angle between the races and the balls is formed when the bearing is in use. The major design characteristic of this type of bearing is that one, or both of the ring races have one shoulder relieved, or higher than the other. In order for these bearings to function properly, they must be assembled with a thrust load. This loading (or preload) creates a line of contact (or contact angle) between the inner race, the ball and the outer race. The preload can be built into the bearing or created when the bearing is inserted into an assembly. The contact angle varies from 15 to 40 degree and is measured relative to a line running perpendicular to the bearing axis. Angular contact bearings are unidirectional thrust bearings that can withstand heavy thrust loads and moderate radial loads.

Important dimensions to consider when searching for angular contact bearings include design units bore, outside diameters, and outer ring width.  Design units can be in either inches or metric units.  Some manufacturers may specify parts in both.  The bearing industry uses a standard number system for bearings with metric diameter bores.  For bore sizes 04 and up multiply by 5 to obtain the bore in millimeters. Important operating specifications to consider when searching for angular contact bearings include rated speed, static radial load, and dynamic radial load.  The rated speed of a bearing running with grease lubrication is lower than that of a bearing with oil lubrication.  The static radial load is the maximum radial load a bearing can endure without excessive permanent deformation.  The dynamic radial load is the calculated constant radial load, which a group of identical bearings with stationary outer rings can theoretically endure for a rating life of 1 million revolutions of the inner ring.

Manufacturers typically assign an ABEC rating to bearings.  ABEC (Annular Bearing Engineers' Committee) ratings classify different accuracy and tolerance ranges for bearings. The higher the ABEC number the tighter the bearing tolerances.  Please consult the tables in the search form for Angular Contact Bearings for tolerances and other rating equivalents.

Angular contact bearings can have a number of different styles of seals or shielding.  Seals and shields provide protection from contamination and serve as a retainer for lubricant.  Seals provide better protection and lubricant containment than shields, but have lower maximum speed capabilities.  The different types include single/double seal or single/double shield.  Angular contact bearings may be constructed of special materials including stainless steel, plastic, and ceramic hybrid. They may also be plated; common plating materials are cadmium and chrome.

Bearing design for angular contact bearings can be one directional thrust, double directional thrust, double row, double row maximum capacity angular, duplex thrust, and four-pointed contact.  Thin-section bearings have small cross-sections with respect to their diameter.   Bearings with ball screw support are specially designed for use in ball screw or lead screw applications.  Some bearings may also be flanged.  Angular contact bearings may have a variety of lubrication options. They can be re-lubricated, pre-lubricated, or have solid lubrication.

Angular contact ball bearings are suitable for applications which require high accuracy and good high-speed performance. This type of bearing is designed to carry a combined load.


Specifications:

  • Bore Size: 10-240 mm
  • Outside Diameter: 19-1000 mm
Get Best QuoteRequest Callback

KG Ball Bearing

Product Price: Rs 50 / PieceGet Best Price

Product Details:
BrandKG
Size6201
MaterialChrome Steel
Usage/ApplicationIndustrial
StructureRound
Get Best QuoteRequest Callback
NBC Tapered Roller Bearings

NBC Tapered Roller Bearings

Get Latest Price

Get Best QuoteRequest Callback
Single Row Deep Groove Ball Bearing

Single Row Deep Groove Ball Bearing

Get Latest Price

Get Best QuoteRequest Callback
Looking For "Ball Bearing"?
Thank youYour Enquiry has been sent successfully.
© DS Speciality Products LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.